5
CAUTION
WARNING
(Fig.5)
(Fig.6)
27mm
The rangehood is quite heavy, so two people
will be needed for installation.
1. To install the appliance, adjust the position of the
adjustable side-springs using the supplied screws
(fig.5), according to the thickness of the board, in
which the appliance will be fixed.
2. Insert the rangehood into the cutout in the
cabinet until the stop click of the side-springs is
heard and the rangehood is supported.
3. Insert the
25mm screws
provided into the holes
inside the rangehood (Fig.6) to fix it to cabinetry.
4. Insert the grease channel.
5. Insert the grease filter (Fig.3b)
Before connecting any ducting to the motor,
make sure the non-return valves - which are on
the air outlet of the motor - can swing open.
External venting
• Connect the flange to the exhaust hole with the
appropriate ducting. Connect the rangehood with
the electrical mains through the supply cord.
