background image

20

ARISIT PTY LIMITED

 (Australia)

ABN 23 091 515 294

40-50 Mark Anthony Drive
Dandenong South VIC 3175

P:

 

 

Sales & Service: 1300 762 219 

F:

  Sales & Service: (03) 9768 0838

E:

  [email protected]

ARISIT PTY LIMITED

 (New Zealand)

1A Howe Street Newton, Auckland 1145
PO Box 68-140 Newton, Auckland 1145

P:

  (09) 306 1020 - Fax: (09) 302 0077

E:

  [email protected]

Sirius Hoods and ducting products are only available 

from our select group of Sirius Professional Stockists 

nationwide. For the latest list of Sirius Stockists 

near you, please refer to 

www.siriusbrand.com

  

All efforts have been made to ensure that the 

information provided in this brochure is correct at 

the time of printing. Due to continuous product 

improvement and ongoing development, Sirius 

reserves the right to make changes to the 

products and technical data without prior notice. 

Some products appearing in this brochure may 

be for illustrative purposes only. Diagrams are 

indicative measures only. Prior to commencing 

cabinetry cutouts the operating/installation 

instructions accompanying the product must 

be referred to at

 

www.siriusbrand.com  

www.arisit.com

www.arisitwarranties.com.au

www.siriusbrand.com

when Sirius ducting is used.

Full replacement warranty on parts and labour. Check website for T&Cs.

Year

Warranty

Summary of Contents for SL926DLTM Series





















Reviews: