background image

5

To install the appliance please respect the follow 
instructions:
•  The appliance must be installed by qualified 

technicians, or where possible use a Sirius 
recommended installer. See siriusbrand.com. In 
order to avoid damage to the electronic parts 
of the appliance, please do not use additional 
screws.

•  Essential precautions to respect before installing 

the appliance are the following:  
To have made a cutout on the bottom of the 
cabinet which is suitable to hold the appliance in 
position (fig. 4): 

SL906 DL 520

 - 501 x 265mm 

SL906 DL 850

 - 835 x 265mm 

SL906 DLTM 850 

- 835 x 265mm 

SL906 DLTM 1000

 - 985 x 265mm 

SL906 DLTM 1200

 - 1100 x 265mm 

SL906 DLTM 1500

 - 1480 x 364mm

SL906 DL series INSTALLATION - 
ONBOARD MOTOR

Before installing the appliance, make sure that 
none of the parts are damaged in any way. In 
case of damaged parts, contact your retailer 
and do not proceed with installation. Read all 
of the following instructions with care before 
installing the appliance. 

•  Use ducting within the min/max specifications
•  Limit the number of ducting bends.
•  Do not make any changes in ducting diameter 

(recommended constant diameter:  
Ø 150 mm / Ø 200 mm / Ø 300mm or equal 
surface area). 

Before installing the appliance - in order not to 
damage the appliance itself - the metal grease filter 
should be removed. These filters could be removed 
by pushing the handles towards the back side of the 
rangehood and pulling it downwards to unfasten it 
from its slot. (Fig.3).

NOTE

(Fig.3a)

(Fig.3b)

(Fig.4)

1.  Prepare the power supply - 240 volts.
2.  Prepare a hole for the exhaust - 160mm diameter 

for single motor & 210mm for twin motor versions 
and 310mm for triple motor version.

•  Do not use screws to fix the ducting to the 

rangehoods as they will prevent the movement of 
non-return valves.

•  Limit the number of elbows in the ducting, since 

each elbow reduces the duct efficiency by 1 
metre. (i.e. if you use two 90° elbows, the length 
of ducting must not exceed 5 metres.)

•  Avoid abrupt direction changes.
•  Use 150mm constant diameter ducting for the 

whole length for the single motor, 200mm ducting 
for the twin motor model, and 300mm for triple 
motor version.

•  The use of Sirius ducting 
•  will increase the warranty of the unit to 6 

years.

WARNING: Failure to install the screws or fixing 
device in accordance with these instructions 
may result in electrical hazards.

Summary of Contents for 9351116005061













Reviews: