Sirius Satellite Radio 9351116000455, Manual, Page: 25 / 32

25
ELECTRICAL CONNECTION
CEILING CASSETTE
CABLE FROM MOTOR
6-PIN PLUG
EARTH WIRE
POWER CABLE LENGTH:
1 METRE
TRANSFORMER BOX
DUMMY PLUG
DUCTING FROM MOTOR TO WALL VENT: (SEM1/SEM11 and SEM8 & SEM81)
1. Run the length of ducting to the motor. (Additional lengths of ducting can be attached using an
additional internal connector pieces.)
NOTE: No connector required as it connects directly to the collar of the motor.
2. Secure with another universal ring clamp (Part ‘F’).
NOTE: The location of the motor is to be no less than 2 metres away from the rangehoood.
Failure to do so may result in additional noise level of the cassette. Maximum distance is 7 metres,
however 3 - 5 metres is optimum to minimise noise and maximise performance.
3. Using another length of semi-rigid duct run from the exit collar on the SEM1/SEM11 and SEM8/SEM81 to
a predetermined exit point and connect to weatherproof vent with a clamp.
See
www.siriusbrand.com for multiple vent options or see our nearest retail partner.
MOTOR WIRING CONNECTION
1. Remove the four screws holding the front of the housing in place to
expose the connections.
2. Following the wiring chart on the fron of the housing, connect each
wire to the matching colour, making sure that this is done correctly
before running power to the unit.
3. Replace the cover and fix the four screws back into place.
SLT958EM, SLT958EMWH, SLT960EM, SLT968EMWH, SLT968EMWH models
SLT972EM, SLT974EM, SLT979EM models