Customer Service 1-888-707-1880
©2009
13
Monitor Function:
How to preset time, distance and calories
1.
Press the mode button until desired function is displayed.
2.
Press the set until your desired number is displayed.
3.
Press the mode button to accept value.
The monitor will count down from your preset value once you start exercising.
The monitor will beep to indicate the completion of your preset value. Press any button to
stop the beep and the monitor will now start to count up.
If more than one value is preset, the first to reach the value will sound the alarm. Once you
have stopped the alarm the next preset value will sound the alarm until you have reached all
preset values.
NOTE:
1.
Monitor requires two “AA” batteries.
2.
The monitor will turn on automatically by pressing any key or when you start
pedaling.
3.
The monitor will turn off automatically if no signal is detected for four minutes.
4.
To reset the odometer, you must remove the batteries.
5.
If monitor is illegible or partial segments appear, remove batteries and wait 15
seconds to re-install.
