![SIRETTA SNYPER-LTE Spectrum Quick Start Manual Download Page 4](http://html1.mh-extra.com/html/siretta/snyper-lte-spectrum/snyper-lte-spectrum_quick-start-manual_1284114004.webp)
4
Preparing the SNYPER-LTE Spectrum
(Non liveSCAN Mode)
SIM
1. Select and attach the antenna required for the network you will be surveying
(Blue antenna - 2/3/4G / Silver antenna - 2600MHz). Screw the antenna onto the
SNYPER-LTE Spectrum by turning clockwise until the antenna is firmly connected.
2. This device requires an active 4G enabled SIM when performing surveys on all
LTE, UMTS and GSM networks. Insert SIM card as shown below.
3. The SNYPER-LTE Spectrum needs to be charged using the mains adaptor for 6 -
8 hours before initial use.
4. Power on the SNYPER-LTE Spectrum by pressing and holding the power button.
See figure 3 for power on screen.
Figure 3.
Power on screen
1
2
3
4
1
2
3
4
Figur
e 2.
Pr
eparing SNYPER-L
TE Spectrum