14
Performing a liveSCAN
The liveSCAN operation with the SNYPER-LTE Spectrum has two uses:
1: Locating the direction of a specific cell using a directional antenna
2: Locating the presence of strongest available signal in a survey result
1. Perform a survey as shown in ‘Performing an LTE Survey’ (page 6). From the LTE
summary screen, select the desired network you would like to liveSCAN, press
the OK button. Press OK again to begin liveSCAN.
1
Performing an LTE liveSCAN
1. Connect the supplied liveSCAN antenna to the SNYPER-LTE Spectrum.
1
Figure 28.
Connecting liveSCAN antenna
Figure 29.
LTE summary
Figure 30.
Begin liveSCAN
Figure 31.
liveSCAN in function
1
