inspired wireless technology
Step 6.
Select the correct COM port for your system and click
‘Connect’
in the
configuration tool window.
Change the device settings as required and click ‘Save’ to make changes to the unit.
LED colour
State
Red (STAT_LED)
Constant ON: Network search / not registered / call in progress
Slow rate once every 3 seconds: Registered full service
OFF: Module power down
Green (GPIO 1)
Reserved / Special Function / Test
Blue (GPIO 2)
Reserved / Special Function / Test
Table 2.
LC300-UMTS LED indication
Your LC300 is now ready to connect to your application using the system settings.
NOTE
- For more information please see the ‘linkCONNECT Software Manual’
