inspired wireless technology
Step 5.
Plug the power supply into the LC300. Ensure the mains supply is plugged
into a power source and switched on. The red LED on the LC300 will start flashing
*
,
this indicates that power has been supplied. See
table 1
for LC300-GPRS LED
indication and
table 2
for LC300-UMTS LED indication.
Flashing red LED indicates power on
LED colour
State
Red (STAT_LED)
Flash rate once per second: Network search / not registered /
turning off
Slow rate once every 3 seconds: Registered full service
Constant ON: Ringing OR call in progress
OFF: Module power down
Green (GPIO 1)
Reserved / Special Function / Test
Blue (GPIO 2)
Reserved / Special Function / Test
Table 1.
LC300-GPRS LED indication
*
If this step fails, please try again. If it fails a second time, please contact your Siretta
representative or call us on +44 (0)118 976 9014.
