12
Bilge Pump Sensor
Monitor bilge pump activity and receive
alerts if your boat is taking on water.
•
There are two ways for the wireless sensor to
monitor bilge pump activity:
1.
Connect the
positive (+)
and
negative (-)
leads from the sensor directly to the
positive
(+)
and
negative (-)
leads of your bilge pump.
2.
Connect the
positive (+)
and
negative (-)
leads from the sensor directly to the bilge
indicator light.
•
Insert the Bilge Pump Tail into the wireless
module and tighten the two hex screws.
•
Insert the wireless sensor battery.
•
Pair the Wireless Module to the main device.
•
Secure the sensor by using the supplied
Mounting Bracket
.
NOTE:
This sensor is polarity sensitive.
