9
of 12
MA14-710ENG-REV1
1. Connect the supplied USB cable to
the unit (1) and the computer.
2. When connected,
• The USB symbol and battery icon briefly display on the LCD screen
• The battery icon indicates the current battery status.
Images do
not display on the screen while the unit is connected to a
computer’s USB port.
Note:
A USB port does not provide enough power to charge the battery. Use
the power adapter to recharge a low battery.
• The unit displays as an external device in Windows Explorer or Finder (Mac)
3. Open the unit’s DCIM folder and move or copy one or more images to a folder
or the desktop on your computer. Images are named and are numbered in the
order saved, for example, IMG_0001.bmp, IMG_0002.bmp, and so on.
4. When you are finished transferring files, make sure that you safely eject (re-
move) the unit from your computer.
Note:
To safely disconnect the unit and protect your data, always follow your
operating system’s procedures for removing a USB device.
Transferring Images to Ridge Pro Plus Using the USB Cable
Any image moved from Ridge Pro Plus to your computer can easily be moved back
to the unit.
Note:
Only images saved by Ridge Pro Plus can be copied back to the unit.
1. Make sure the unit is connected to your computer using the supplied USB cable.
2. Locate the image on your computer using Windows Explorer or Finder (Mac).
3. Select the image and drag it to Ridge Pro Plus DCIM folder.
4. When you are finished transferring files, make sure that you safely eject (re-
move) the unit from your computer.
Note:
To safely disconnect the unit and protect your data, always follow your
operating system’s procedures for removing a USB device.
Auto Review Mode
You can create a slide show that loops continuously using the images saved on
the unit. Each image displays for approximately five seconds. The order that imag-
es display is based on their file names, for example, IMG_0001.bmp, IMG_0002.
bmp, and so on.
To rearrange the order that images display, you can transfer them to your com-
puter, rename the files in the order that you like, and then transfer them back to
the unit. (The file names should not be longer than eight characters followed by
the BMP file extension.)
Note:
When in Auto Review mode, the 30-minute power-off timer is disabled.
To start, do the following:
1. Press and HOLD the red button
for approximately six seconds to enter Re-
view mode.
2. Press and HOLD the green/yellow button , then press the blue UP arrow .
