Siqura MSD622, Installation Manual, Page: 26 / 40

Siqura MSD622
Page 22
8. Adjust the waterproof boot to the junction of the gooseneck tube and the indoor tube
adaptor.
9. Connect the cables to the dome camera. Then attach the dome to the indoor tube adaptor
and fasten them together with the supplied screw.
Corner wall mounting: corner standard mounting plate + gooseneck tube/mini
wall mount + indoor tube a waterproof boot
5.6 Pole Mount
There are two ways to mount the Siqura HSD622 and HSD626 cameras on a pole:

Using a thin/wide direct mount as described in the section Pole thin/wide direct mounting.

Using a thin/wide box mount as described in the section Pole thin/wide box mounting.
5.6.1 Pole thin/wide direct mounting
The dome can be installed to a pole with a thin/wide direct mounting accessory and a gooseneck
tube.
Items Needed

Dome camera

Gooseneck tube and other equipped items (optional accessory)

Indoor tube adaptor for the MSD622 (optional accessory)

Waterproof boot (supplied with the indoor tube adaptor)

Pole thin direct mounting (optional accessory)

Stainless steel straps (optional accessory)
Tools Needed

Stainless strap cutter (optional accessory)

Screwdriver

To mount the dome camera with the pole thin direct mounting and gooseneck
1. Fasten the pole thin direct mounting on a pole with equipped stainless steel straps.
2. Fix the gooseneck tube to the pole direct mounting with the supplied screws and washers.
3. Attach the waterproof boot to the gooseneck tube.
4. Thread the cables through the gooseneck tube and the indoor tube adaptor.