Siqura MSD622, Installation Manual, Page: 17 / 40

Dome Setup and Cable Connection
Page 13
4.6.1 Cable requirements
For operation, the camera requires a video and cable harness, as described below.

A cable to provide a 24 VAC power supply to the dome.

A Cat-5 Ethernet cable.

Optional audio cables.

Optional coaxial cable to monitor analog video.
Important:
Ensure the power supply corresponds with the dome's power requirement, or damage
will occur. If any mistake happens, contact a qualified technician.
4.6.2 Verifying Ethernet connectivity
Refer to the following figure to determine whether you have established an Ethernet connection.
Ethernet socket LEDs green/yellow
Green on/off : 100/10 Mbit
Yellow on/blink
Yellow off/flash
4.6.3 22-pin cable harness
The MSD622's 22-pin cable harness