4
Get access to the unit
From a standard browser on your PC, you can connect to the web interface of the unit. Use
the webpages to view live video over the network, remotely operate the PTZ functions, and
configure the settings of the unit. This chapter explains how to open the web interface in your
browser.
In This Chapter
4.1
Get access via web browser
Connect to the unit from your web browser
1
Open your web browser.
2
Type the IP address of the unit in the address bar.
The factory-set IP address of the unit is in the 10.x.x.x range.
3
Press ENTER.
The Live Stream page is opened.
- or -
If user accounts exist on the unit, you are directed to the login page (see "Log on to the
unit" on page 10).
4.2
Get access via Device Manager
Device Manager is a Windows-based software tool that you can use to manage and configure
our cameras and video encoders. The tool automatically locates these devices on the network
and offers you an intuitive interface to set and manage network settings, configure devices,
show device status, and perform firmware upgrade.
Install Device Manager
1
Download the latest version of Device Manager at siqura.com/downloads/software.
2
Double-click the setup file.
3
Follow the installation steps to install the software.
Connect to the unit via Device Manager
1
Start Device Manager
The network is scanned.
Detected devices appear in the List View pane.
2
If multiple network adapters exist, select the appropriate adapter to scan the network
that you wish to connect to.
3
To perform a manual search, click the Rescan button.
9