manualshive.com logo in svg

Sipura Technology SPA-841, Administration Manual

Share
Download
Sipura Technology SPA-841 Administration Manual Download Page 70

 

 

DRAFT

 

© 2003 - 2005 Sipura Technology, Inc 

Proprietary (See Copyright Notice on Page 2) 

 

70

Premium Features 

Premium functionality in the SPA-841 is enabled via license keys, that can be obtained from Sipura 
Technology.  Specifically, the 4 independently configurable extension capability  can be enabled with 
such a key. This is an “upgrade” from the 2 independently configurable extension capability that comes 
with the default SPA-841. 
 
The keys consist of a sequence of letters and digits, organized in groups of 4, separated by the ‘-‘ 
character.  Each key is unique to a specific phone.  To enable the premium feature in a phone, program 
the key supplied for that phone into the License_Keys parameter, either via the phone’s webUI, or via 
remote provisioning.  This operation need only be performed once.  Thereafter, the premium feature is 
enabled on that phone.  The License_Keys parameter is write-only, and will revert to the empty state after 
every submit or resync operation.  If the key is programmed via a remote profile resync, it is advisable 
that the License_Keys parameter be emptied in the profile stored on the server once the key has been 
installed in the phone. 
 
To obtain premium feature license keys for the SPA-841, please contact Sipura Technology: 

[email protected]

. 

 
 

15  Functional URLs for Upgrades, Reboot and Resynch 

The web interface of the SPA supports several functions through special URLs: Upgrade, Reboot and 
Resync. Administrator privilege is needed for these functions. 

Upgrade URL 

Through upgrade URL the user can upgrade the SPA to a firmware specified by the URL. Note: If the 
value of “upgrade enable” parameter in Provisioning tab is no, the user cannot upgrade the SPA even if 
the web page tells you that the upgrade will be done when it is not in use. See 

14

 to get more information 

on firmware upgrade. 
The syntax of Upgrade URL is: 
http://<spa-ip-addr>/upgrade?[protocol://][server-name[:port]][/firmware-pathname]  or 
http://<spa-ip-addr>/admin/upgrade?[protocol://][server-name[:port]][/firmware-pathname] 
 

•

 

If no protocol is specified, TFTP is assumed. Note: Only TFTP is supported in the current release. 

•

 

If no server-name is specified, the host that requests the URL is used as server-name.  

•

 

If no port specified, default port of the protocol is used. (69 for TFTP) 

•

 

The “firmware-pathname” is typically the file name of the SPA binary located in the root directory 
of the TFTP server. If no firmware-pathname is specified, “/spa.bin” is assumed. 

•

 

For example:  

http://192.168.2.217/upgrade?tftp://192.168.2.251/spa.bin

 

 

Resync URL 

Through Resync URL the user can force the SPA to do a resync to a profile specified in the URL.  

 
Note

: The SPA will resync only when it is idle. 

 
The syntax of Resync URL is: 
http://<spa-ip-addr>/resync?[[protocol://][server-name[:port]]/profile-pathname] 
 

•

 

If no parameter follows “/resync?”, the profile rule setting in provisioning is used.  

Summary of Contents for SPA-841
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands