Sipura Technology SPA-841 Administration Manual Download Page 43

Page: 43 / 79

DRAFT

Proprietary (See Copyright Notice on Page 2)

resync provisioning

discussion
section

Log Resync Failure Msg

Syslog message generated after a failed resync

ProfileMsg

See
provisioning
discussion
section

Upgrade Parameters

Parameter Name

Description

Type

Default

Upgrade Enable

Master enable for firmware upgrade operations

Bool

Yes

Upgrade Error Retry Delay

Retry interval following upgrade failure

Time0

3600

Upgrade Rev Limit

Restricts downgrades to versions greater than a
specified minimum version

RevNum empty

Upgrade Rule

Upgrade script.

UpgradeScript

empty

Log Upgrade Request Msg

Syslog message generated when attempting an
upgrade

UpgradeMsg See

provisioning
discussion
section

Log Upgrade Success Msg

Syslog message generated after a successful
upgrade

UpgradeMsg See

provisioning
discussion
section

Log Upgrade Failure Msg

Syslog message generated after a failed upgrade

UpgradeMsg

See
provisioning
discussion
section

License Keys

Premium features license keys. The key need only
be entered once. (write-only parameter)

String empty

SIP Parameters

Parameter Name

Description

Type

Default

Max Forward

SIP Max-Forward value. Range: 1 – 255

Uns8

Max Redirection

Number of times to allow an INVITE to be
redirected by a 3xx response to avoid an infinite
loop.

Note: This parameter currently has no effect:
there is no limit on number of redirection.

Uns8 5

Max Auth

Maximum number of times a request may be
challenged (0-255)

Uns8 2

SIP User Agent Name

User-Agent Header to be used by the unit in
outbound requests. If empty, the header is not
included.

Str63 Sipura/

$version

SIP Server Name

Server Header to used by the unit in responses to
inbound responses. If empty, the header is not
included.

Str63 Sipura/

$version

SIP Accept Language

Accept-Language Header to be used by the unit.
If empty, the header is not included.

Str31

Remove Last Reg

Remove last registration before registering a new
one if value is different one.

Bool no

DTMF Relay MIME

This is the MIME Type to be used in a SIP INFO

Str31 application/dtmf-relay

Summary of Contents for SPA-841
















































































Search results

Summary of Contents for SPA-841

Reviews:

Brands by name

Popular brands

Sipura Technology SPA-841, Administration Manual

Search results

Summary of Contents for SPA-841

Reviews:

Brands by name

Popular brands