２．
Purchase/Settings in Web Portal
＜
SIP Trunk 2 Detailed Settings
・
Authentication using both IP Address and Password>
①
②
④
③
⑤
⑤
⑥
⑦
⑧
⑨
①
Login server name of SIP Trunk 2
⑩
⑪
①
Login server name of SIP Trunk 2
②
Our SIP Server IP Address
Please configure it as [peer] in sip.conf on your Asterisk.
*Please refer p.14 for details
③
Unique is used as client user ID of your user PBX end.
④
Item “Name” is where you can name/rename your SIP Trunk account.
⑤
Select authentication method as “Authentication using Both IP Address and Password”
Select authentication method as “Authentication using Both IP Address and Password”
⑥ Enter your terminal password is used as client user password of your PBX end.
⑦
Enter a public IP address / a port number of your IP-PBX *You can add multiple IP addresses/ports
from “+Insert” button.
⑧
In case you use Free Call or Navi-Dial number, please designate format of incoming number
configured on your SIP server.
Checked : Please configure 0ABJ number
Unchecked : Please configure Free Call or Navi-Dial number.
Unchecked : Please configure Free Call or Navi-Dial number.
(* Changing check box status is not allowed.)
⑨ Set multiple call count. It’s 1 by default. Purchase “Additional 1 channel for
SIP Trunk 2” if you need more than 2 concurrent calls.
⑩ If this option is checked, you can specify channel reservation for multiple outbound calls.
⑪ If this option is checked, you can specify channel reservation for multiple inbound calls.
*Note ⑩ and ⑪
11
*Note ⑩ and ⑪
The total channel reservation (ou inbound) must not exceed the multiple call count.
Please refer p.12 for further details.
