SIP 50001100, Instructions Manual

Page: 28 / 40

28-29
Main display
Hold the button down for 3 seconds to switch from
the main display to measuring unit settings.
Tyre circumference setting
Hold the button down for 3 seconds to enter the
speed signal setting.
Press the button once to select the speed sensor
type you would like to use.
Factory setting: Intern.
For using Ext. (Extern: Sensor, accessory)
speed sensor, e.g. SIP speed sensor
50000270, please refer to the manual
delivered with the speed sensor.
Hold the button down for 3 seconds to return to the
ADJ 2 menu (speed measuring).
A: Int (Intern: Speedo cable)
B: Ext (Extern: Sensor, accessory)
Press the button once to enter the ADJ 3 menu
(tyre circumference setting).
NOTE!
Hold the button down for 3 seconds to enter the
ADJ 1 menu (measuring unit setting).
Press the button once to switch the setting from
km/h to mile.
Hold the button down for 3 seconds to enter the
speed/rpm setting menu.
Press the button once to switch from rpm to
speed.
Hold the button down for 3 seconds to return to
the ADJ 1 menu.
Press the button once the enter the ADJ 2 menu
(speed signal setting).
Hold the button down for 3 seconds to enter the
temp.unit setting menu.
Press the button once to switch the setting from
°C to °F.
E.g: The tire circumference is 1,300mm.
Hold the button down for 3 seconds to enter the
tire circumference and transmission ratio settings.
Hold the button down for 3 seconds to move to the
digit you want to set.
Measuring unit setting
1.Setting range: 300-2,500mm.
Setting unit: 1mm
2.The default setting: 1,000mm.
FUNCTION SETTING INSTRUCTIONS
NOTE!