1.4
Design
•
Remove the lid.
•
Remove the discharged batteries.
•
Insert the new batteries paying attention to the polarity (figure 1.1)
•
Switch on the device and check the battery status on the display (figure 1.4.2).
ATTENTION!
Changing the batteries causes loss of time, if Tango_Plus is not connected
to external power supply at the same time.
1.4
Design
Figure 1.2: Design of the device
Tango_Plus contains the following
parts: detachable microphone with
preamplifier, casing, display, keypad
and battery compartment. Opening
the device is only necessary for
replacing the batteries (figure 1.3.1).
At the bottom of the device the USB
socket is located for connecting
the device to a PC (type USB-C).
Next to it there is a socket for a 3.5
mm stereo jack.
This monitoring
output is used to connect a headset
for example,
it is
not
approved
for legally binding measurements.
Furthermore Tango_Plus provides a
socket to connect a printer directly
(section 2.5.5).
A detailed description of the display
and keypad is given in the para-
graphs 1.4.2 and 1.4.1. Pay also at-
tention to the notes given in para-
graph 1.2.
ATTENTION!
For legally binding measurements Tango_Plus has to be powered only by
battery. The monitoring output is not approved for this.
SINUS Messtechnik GmbH
7 of 47
Manual Tango_Plus
