Checklist of main steps
1. Remove chassis ground cable from car battery
2. Choose suitable place for the amp and mount it.
3. Install plus battery cable from battery to amplifier
4. Install all RCA cables with remote wire from radio to amplifier
5. Connect all cables to the amplifier
6. Reconnect minus (chassis ground) to battery.
7. Adjust as described
8. Have fun
Malfunction
What to do
Power LED doesn`t light up
check all fuses on the amplifier
check main fuse near the battery
check plus and minus battery cables
check remote voltage
Power LED is on but no sound check volume control on the radio
check GAIN regulator on the amplifier
check RCA cables and connections
check speaker cables and connections
Bass response is low
one speaker cable could be misconnected
the bass regulator on the radio is set on low
an active crossover unit is adjusted wrong
The amplifier switches on and off
bad chassis ground connection to the
amplifier
cable terminals and battery terminals are
oxidated
low voltage from the battery
remote wire is not connected right
One channel has no function
check RCA connections of this channel
check speaker connection of this channel
balance regulator to the radio is not set in the
middle
check speakers for this channel
If you cannot solve any of these problems please consult your dealer.
10
