Sintrol DUMO User Manual Download Page 4

Page 4 

Figure 1. Dumo structure 

2. INSTALLATION 

2.1.  Selecting the installation location 

Dumo should be located so that measured data clearly represents dust 
concentration in a selected work environment. Because of this the user should 
always think carefully what he wants to monitor and where the device should 
be placed. 

For example Dumo can be placed close to the cement mill if the user is 
interested in the variation of the amount of dust particles during the process. If 
the user is interested in dust concentration level in general, then Dumo should 
be located in a more “peaceful” place, some distance from the process. 

There are still certain basic requirements for Dumo monitoring environment 
which one must take into account when preparing the measurements. 

1.  Temperature in measurement environment should be between  -20 C and 

+60 C. The more stable temperature, the better. 

EASTERN ENERGY SERVICES PTE LTD.

60 Kaki Bukit Place #02-19 Eunos Tech Park Singapore, SG 415979 Singapore
Telephone: +65-6748 6911 Fax: +65-6748 6912
Email: [email protected] Website: 

www.eesgroup.com

Summary of Contents for DUMO










Reviews: