Sinterit INTERTEK Vacuum Cleaner USER MANUAL | 19
ATTENTION!
Before switching the vacuum cleaner back on, make sure the motors have come to a complete
halt.
1. When sucking the powder out of the printing chamber, hold the Rubber nozzle close to the surface. Do not insert in
the bottom of the chamber (Image 11).
2. Do not block the hose outlet/nozzle by hand!
Image 11. Incorrect and correct removing the powder from the print chamber.
3. The capacity of the collected material in each device should not exceed 3/4 of the container. After each cleaning
process, open the device to check the current filling level.
4. For proper operation of each device (vacuum cleaner/powder separator), it is necessary to leave some free space in
the container in order to keep the air access.
POWDER
ONLY 3/4 OF THE CONTAINER
MAX 3/4 HEIGHT
MAX 3/4 HEIGHT
Image 12. Maximum capacity of the powder.
