background image

-8-

The Remote Control

Using the remote control

Open the battery door and insert 2 "AAA" batteries.

Point the remote control at the remote sensor located on the unit.

When there is a strong ambient light source, the performance of the infrared remote sensor 

   may be degraded, causing unreliable operation.

The recommended effective distance for remote operation is about  16 feet (5 meters).

When the batteries become weak and the operating distance of the remote control is 

   greatly reduced , you will need to replace the batteries.

If the remote control is not going to be used for a long period of time, remove the batteries 

   to avoid damage caused by battery leakage or corrosion.

Do not mix old and new batteries or ALKALINE or standard (CARBON-ZINC) or 

   rechargeable (NICKEL-CADMIUM) batteries.

Always remove batteries as soon as they become weak.

Weak batteries can leak and severely damage the remote control.

Do not dispose of batteries in fire, they may explode or leak. Batteries should not be 

   exposed to excessive heat such as sunshine, fire or the like.

 

 

 

 

 

 

 

 

 

 

 

 

 CAUTION : Danger of explosion may occur if battery is incorrectly replaced.

Summary of Contents for STL-55N86UM

























Reviews: