it can be counted from the initial value to the maximum value of 65535, and then it can be re-counted from 0.
The DI signal must be kept for several sampling periods before it can be confirmed. The default value is 0x6, which
means that 6 sample periods are required to be confirmed. This value can be modified according to the site
conditions, and the range is 0-20.
When set to auto-zero, the DI positive/negative pulse count or DI logic level count value will be automatically
cleared after each reading.
When set to manually clear, DI positive/negative pulse count and DI logic level count value will not be cleared
every time, and need to be cleared manually. (Manually write the value 0 to clear)
C2000-A1-SDD1010-AB3 User Manual
15 / 34
SinoCon Co., Ltd.
www.sinoconsys.com
