IDD-213C User Manual
12
Some heavy duties may need 9-Pin or 6-Pin deutsch wiring harness.
For vehicles do not have an OBD port, please use power cable to connect vehicle
battery and configure the device with tracker mode.
Start engine, then device starts OBD communication, acquiring GPS info and Cellular
network connection. Various status can be indicated by lights and beeps.
OBD communication: The OBD light change its status to solid on and comes 2 beeps
with successful OBD communication.
GPS function: The GPS light becomes blinking indicates that device has got its
location.
Cellular connection: The Cellular light change its status to slow blinking indicates
registered network, becomes solid on and comes 3 beeps indicate logged into the
server.
Note:
*Firmware below V2.2.2: When working with passenger or heavy duty mode, if OBD light keeps
blinking and comes 6 beeps it means that device is not compatible with the vehicle, please change
working mode. If it does not work with both passenger and heavy duty modes please change to
tracker mode. To change working mode: 1) Remove the device,
configure with PC Tool and install
again. Or, 2) Send SMS
*secretkey#set workmode#mode*
,
secretkey
is the last 6 digits of device ID
