Sinoboom GTTZ10EJ, Operation Manual

Page: 21 / 88

SAFETY
GTTZ10EJ Operation Manual 3-3 © Nov. 2020
TIPPING HAZARDS
• Do not change any machine parts
that may affect safety and
stability.
• Do not replace key parts that
affect machine stability with
different weights or
specifications.
• Do not modify or change moving
aerial platforms without the
manufacturer’s prior written
permission.
• On the platform, do not attach an
additional device for placing tools
or other materials to the guardrail.
This will increase the platform
weight, surface area and load.
• Do not place on, or fasten any
overhanging load to any part of
this machine.
• Do not place ladders or
scaffolding on the platform or any
parts of the machine.
• Do not use the machine on a
moving or active surface or on a
vehicle. Ensure all tires are in
good condition, the slotted nuts
tightened and the cotter pins
complete.
• Do not use a battery that weighs
less than the original one(30kg[66
lb], and do not remove or modify
the counterweight or other parts
of the battery box. The battery not
only provides power, it also
serves as a counterweight. The
battery is vital to maintaining the
stability of the machine.
• Do not use the platform or mast/
boom to push other machines or
objects.
• Do not let the platform or mast/
boom touch the nearby
structures.
• Do not tie off the platform with
rope or other binding materials to
the nearby structures.
• Do not put a load outside the
platform.
• When the platform is caught or
stuck or when other objects in the
vicinity impede its normal
movement, do not use the
TIPPING HAZARDS
platform controller to lower the
platform. If you intend to lower the
platform with a ground controller,
you must operate it only after all
personnel have left the platform.