Sinoboom GTJZ0612E, Maintenance Manual

Page: 82 / 94

© Jul.2020 5-24 GTJZ0612E&0812E&1012E&1212E Maintenance Manual
MAINTENANCE PROCEDURES
Problem Cause Solution
No overload warning
The load has not been
calibrated or the height is
incorrect
• The sensor has not been calibrated.
• The wiring of the load sensor is incorrect.
• The sensor is not in good condition.
The machine moves
and then stops
intermittently
The battery level is low/the
calibration is incorrect
• Re-calibrate the parameters.
• The battery is out of power. The electricity meter
only can be referred.
After setting, the
parameters could not
be saved successfully
after several trials.
The storage is abnormal
• The parameters cross the line.
• The lower platform controller is malfunctioning.