Sinoboom GTJZ0608, Operation Manual

Page: 12 / 37

Only when the machine is in a firm and flat
ground can the platform be raised or extended.
Do not use the tilt alarm as a horizontal indicator.
The tilt alarm on the platform will ring only
when the machine is heavily tilted.
If the tilt alarm rings:
Lower the platform and transfer the machine to
a solid and horizontal ground surface.
It is necessary to lower the platform very
carefully if the tilt alarm rings when rising up
the platform. It is prohibited to change the
horizontal or limit switch.
Running speed should not exceed 0.8km/h when
the platform rises.
The machine cannot travel on uneven terrain,
unstable surface or other dangerous conditions
when the platform rises.
Do not operate the machine during strong winds
or gusts. Do not increase the surface area of
platform or load. Increasing the area exposed to
wind will reduce the machine stability.
When the machine retracts, be careful and slow
down when the machine is moving on uneven
terrain, with crushed stone, unstable or smooth
surface, near cave mouth and steep slope.
Do not drive the machine on the slope that
exceeds the maximum gradeability of the
machine. The {30%(17°), 25%
（
14°
）
} of the
maximum gradeability is applicable to the
machine under retraction.
Do not change the limit switch.
Do not push any
object outside the
platform.
Maximum
allowable
Yawing force is
indoor 400N
outdoor 200N
Do not change and prohibit the usage of any
machine parts that may affect safety and
stability.
Do not replace the key parts that affect machine
stability with different weights or specifications.
Do not change or modify the aerial work
platform without the prior written permission of
10
GTJZ0608 & GTJZ0808 & GTJZ1012 & GTJZ1212 & GTJZ0612 & GTJZ0812
Operation Manual