Setup: Making Connections
1) Remove Studio Console (A) from Studio Holder Bezel to gain easy access to the Studio’s inputs & outputs.
2) As per Fig-1 below, feed the Studio AC Power Adapter, audio and mic cables through rear opening in Bezel and make connections before re-inserting Studio
Console. Reference Fig-2 for corresponding input/output connections.
a) Plug Mic (B) into “LEAD/MIC 1” input. MIC 2 input can be used for a 2nd mic and has basic effects including reverb & delay with no hit feature or
pitch-correction.
b) Plug the 3.5mm Audio Cable (F) into “MUSIC IN”. Plug the other end into your tablet, smartphone or other music device (see list of device options
in following section). Singtrix tunes your voice & harmonies to the music played. In place of karaoke music from your device, you can plug in an
instrument such as a guitar or keyboard (see “Live Mode” section for more details).
c) Plug the 3.5mm end of the Speaker Audio Cable (E) into “OUTPUT 1” or “OUTPUT 2”. Note: make sure the plugs are fully inserted to prevent hum.
d) Plug Studio Power Adapter (H) into “DC IN” on Studio.
3) Tilt Studio Console back and insert into Bezel leading with plug connectors positioned into rear opening.
4) Plug opposite end of Speaker Audio Cable (E) with RCA connectors into “L/R MUSIC INPUT on the Speaker (C).
5) Plug Speaker Power Adapter (G) into “DC IN” on speaker.
6) Insert the Tablet Easel Back Insert (D) into the slots located next to the device holder channel at the back of the Bezel.
Fig-1
Fig-2
Studio Input/Output
