35
[ To adjust ]:
1. While pressing the needle up/down button and
lock stitch button, turn the power switch on. Then
press the number “8” within 3 seconds as shown in
the Fig. II.
2. Set the stretch stitch balance dial (C) at the setting
mark (D).
3. Sew 8 of number 8 and check if the measurement
of five of them is between 32 and 38mm.
4. If not, remove the base lid (E), and turn the
adjusting screw in the direction of:
(A) if the measurement is more than 38mm.
(B) If the measurement is less than 32mm.
* When the “?” button is pressed, the adjusting
screw (F) comes to the adjusting position.
Turn the adjusting screw, then press “?” button
and sew 8 of number 8.
5. Turn off the power switch.
6. Attach the base lid (E).
Stretch stitch
balance dial
Setting
mark (D)
Base lid (E)
(A)
(B)
Adjusting screw (F)
(A)
(B)
32 - 38
Feed Adjustment
Sew
Stop
8 8 8 8 8 8 8 8
TO ADJUST STRETCH STITCH FEED BALANCE
When the number 8 is sewn 5 times with the stretch stitch balance dial (C) at the setting mark (D), the
measurement should be between 32 and 38mm as shown in Fig. 1.
Fig. II
Fig. I
