Singer SteamCraft Plus, Instruction Manual

Page: 10 / 132

Troubleshooting
This electrical appliance complies with directive 2002/96/EC (Waste Electrical and Electronic
Equipment – WEEE).
The meaning of the crossed-through waste bin symbol on the appliance is the
product must be disposed of separately to other household waste at the end of
the useful life of the appliance. The user is responsible for delivering appliance
to an appropriate collection center at that time.
Appropriate separate collection for environment-friendly treatment and recycling prevents or
reduces harmful effect on the environment and human health. You can obtain information on
available collection services in your area by contacting your local Council waste collection
department, or the retailer from which you bought the appliance.
10 – ENGLISH
PROBLEM POSSIBLE CAUSE SOLUTION
The iron is plugged in but
soleplate is cold.
No steam released.
Steam Burst not working.
No spray mist released.
Water leaks from soleplate.
Soleplate is too cool.
Damage to fabric.
Flakes and impurities come
out of the soleplate holes
during ironing.
Electrical outlet does not work.
There is a connection problem.
The temperature setting has
been set to “Low”.
Low water in the Water Tank.
Steam Selector is in Steam Off
position.
Low water in the Water Tank.
First time use.
Low water in the Water Tank.
First time use.
Steam Iron’s heat setting is too
low to produce steam.
Steam Selector is in the ‘ON’
position while refilling Water
Tank.
Pressing Steam Button to many
Incorrect Temperature Setting.
Temperature setting is too high.
You have been using hard water,
which has caused scale flakes
to develop inside the soleplate.
Plug in to another outlet.
Check if the plug is inserted in the
outlet properly.
Set the temperature setting to a higher
temperature.
Fill the Water Tank using instructions
found in this manual.
Turn the Steam Selector to Steam ON
position.
Fill the Water Tank using instructions
found in this manual.
Press the Burst of Steam Button a few
times until Steam Burst is released.
Fill the Water Tank using instructions
found in this manual.
Press the Spray Button a few times
until spray mist is released.
Set temperature setting to Max
position using the Temperature
Control Dial.
Turn the Steam Selector to ( )
position before refilling Water Tank.
Press Steam Button slower and press
Turn Temperature Control Dial
until you reach the correct (higher)
temperature setting.
Follow the garment guide or test
the inside of the garment before
ironing. Adjust temperature setting
Perform Self-Cleaning one or more
times. See “Self-Cleaning” section of
this manual.