Singer SGR-500LCD, Instruction Manual

Page: 8 / 52

8
ENGLISH
HOW TO FILL WATER
The appliance has an electronic system to monitoring the water level. When
the water level is lower than min level, the
Fill Indicator will blink with
beep sound until the water is re- fi lled.
1. Disconnect the power cord from mains supply outlet.
2. Pull out the water tank water tank, see Fig 4
3. Open the water inlet cover
4. Fill water through the water inlet up to MAX level.
5. Replace the water tank in its place.
Due to the life cycle of anti-calcium resins and the water hardness, Suggest
replace the anti-cal cartridge when the indicator go blinking.
If new cartridge is unavailable you may use distilled water and continue operat-
ing the appliance.
FIRST TIME IRONING
1. Remove any protective fi lms or sticker from the sole plate and the cabi-
net, if any.
2. Unwind and straighten the power cord and supply cord.
3. Fill the water tank with tap water. (See HOW TO FILL WATER)
4. Connect the appliance to a suitable mains supply outlet.
5. LCD will display a second then off with beep sound.
6. Press the power On/Off button
7. The min steam level and medium hard water level indicators will display
with a beep sound.
8. The Steam Chamber heat-up indicator will goes blinking which in-
dicate the steam chamber heating up. The warning beep sound will be
heard if press steam knob and steam will not release.
Fig. 4