Singer SGR-19400, Instruction Manual

Page: 6 / 44

6
ENGLISH
5. Always make sure the continuous steam button is in the off position
before you will turn on the appliance. Only use the steam functions when
the appliance is preheated otherwise the water will not evaporate and the
appliance will leak water.
6. Heat up the iron to maximum temperature and iron over a piece of damp
cloth for several minutes for the purpose of removing any residue on the
soleplate according to the section of “
Steam ironing ”.
NOTE: It is normal that strange odor comes out from the unit for the fi rst
use. This will cease after a short while.
NOTE: Some particles may come out of the soleplate when you use the
iron for the
fi rst time. This is normal; the particles are harmless and stop
coming out of the iron after a short while.
NOTE: When you switch on the appliance, the steam generator may
produce a pumping sound. This is normal; the sound tells you that water
is pumped into the steam generator.
NOTE: During the heating process of the soleplate, there will be little
steam coming out from the soleplate automatically and this phenomenon
will continue for about 3 seconds, this is normal.
USING YOUR STEAM STATION
The appliance has following ironing option: dry, vertical or steam ironing, the
details are referred below:
Dry ironing
1. Place the steam station on a stable and horizontal surface.
2. Connect the plug to wall outlet select from the continuous steam button lock
(D) the dry ironing (without steam) and press down the On/Off Power switch
(H).
3. Turn the temperature switch (B) to your desired setting, which is depended
on the fabric of garment, and then the temperature indicator will illuminate.
Refer to IRONING TIPS latter. The iron starts heating.
4. When the temperature indicator turns off, the selected temperature is
reached. You can now start ironing.
WARNING: Never touch the hot soleplate before cooling down!