A
B
C
D
G
H
F
E
C
D
A
B
I
20 –
GETTING READY TO SEW
Threading the Right Needle
Note: Raise the presser foot lifter for easier threading.
Set the Threading/Sewing switch to “Threading” position by
turning it to the right.
Turn the handwheel slowly toward you until the mark on the
wheel matches the mark on the cover. The hand wheel will
click and is locked in threading position.
Place a thread spool on the second left spool pin. Pull
the thread through the second left thread guide from
back to front (A).
Note: If the thread tends to slip away from the guide
while sewing, pass the thread through both thread
guide holes as shown (B).
Slide the thread under the top cover thread guide (C) as
illustrated.
Pull the thread along the threading slit. Using both
hands, insert the thread between the tension disks (D).
Turn off the main power switch and unplug the machine.
