A
B
E
F
H
G
C
D
A
B
E
F
C
D
L
M
J
I
K
14 –
GETTING READY TO SEW
Note: Raise the presser foot lifter for easier threading.
Place a thread spool on the very right spool pin. Pull the
thread through the right thread guide from back to front (A).
Note: If the thread tends to slip away from the guide
while sewing, pass the thread through both thread guide
holes as shown (B).
Slide the thread under the top cover thread guide (C) as
illustrated.
Pull the thread along the threading slit. Using both hands,
insert the thread between the tension disks (D).
Set the lower looper pre-tension setting slider (E) to
NORM.
Pull the thread down along the slit and into the lower
looper thread guide (F).
Pull out approximately 12˝ (30 cm) of thread. Make sure
that the thread does not get tangled around the lever or
the cover.
Threading the Lower Looper
Turn off the main power switch and unplug the machine.
