manualshive.com logo in svg

Singer Quantum XL-6000, Instruction Manual

Share
Download
Singer Quantum XL-6000 Instruction Manual Download Page 43

42

Heirloom Sewing (Using Optional wing needle)

Stitch pattern to
be selected

Make sure power/light switch is
off before inserting needle.

Caution

Presser foot to
be selected

Decorative
stitch foot (T)

Insert wing needle.

Recommended Heirloom
Patterns.

IMPORTANT

Automatic
needle threader
cannot be used.

Use correct presser foot.

1

2

3

4

Decorative
stitch foot (T)

Press

Press

Press

Decorative Topstitching

Stitch pattern to
be selected

Select Running Stitch Pattern.

Thread bobbin with desired topstitching color.

Manually thread machine with invisible or light weight
thread which matches fabric and will not show.

Adjust stitch length if desired.

Sew.

1
2
3

4
5

Presser foot to
be selected

Standard presser
foot (A)

There are 9 unique stitch patterns which are perfect for decorative
topstitching and quilting.
There patterns are designed to look like hand sewing.

How to Set Machine for Running Quilt Pattern 

Summary of Contents for Quantum XL-6000









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands