Singer Quantum XL-6000, Instruction Manual

Page: 113 / 136

112
1/4 inch Quilter's foot (Part No. 386005)
Uses:
* To sew perfect 1/4" seams for piecing quilt blocks.
* To sew narrow seams, such as those in doll clothes.
Procedures:
* Use in place of A foot.
* Select straight stitch pattern full left (automatic) position.
Darning/embroidery foot (Part No.386017)
Uses:
* For free-motion embroidery, darning & monogramming.
Procedures:
1) Drop feed dog.
2) Place fabric into embroidery hoop (optional).
3) Attach foot and tighten presser foot screw with
exclusive screwdriver. Begin stitching, moving hoop as
you stitch. If not using hoop, grasp fabric firmly with two
hands and hold tact.
Sew at slow to medium even sewing speed.
Open toe embroidery foot (Part No.386023)
Uses:
* For satin stitching.
* For applique.
* For machine embroidery, cutwork and fagoting.
Procedures:
* This foot allows a clear view for sewing above techniques.
* Follow instructions found in Singer Sewing Reference
Library Series.
Pintuck foot (Part No.386022)
Uses:
* Sews evenly spaced plain twin needle pintucks.
* Sews evenly spaced corded twin needle pintucks.
Procedures:
Plain pintucks
1) Insert twin needle and thread machine with two spools
of thread.
2) Select center needle position straight stitch.
3) Mark straight line for first pintuck.
4) Stitch along marked line. Increase tension as desired,
to make pintucks stand up.
5) Place first tuck into desired groove on bottom of pintuck
foot. Stitch, allowing groove to guide fabric for evenly
spaced tucks.
Corded pintucks:
Follow procedure above, but place cording under fabric.
Lower twin needle by hand to ensure cording is centered
in between stitch, being sure to catch cording between
needles.
Optional Accessories