manualshive.com logo in svg

Singer 6199, Instruction Manual

Share
Download
Singer 6199 Instruction Manual Download Page 21

19

Bobbin winder is moved to right (operating position) during sewing.

➡

 

Check bobbin winder and move it to left.

Buttonhole lever is not lowered or raised.

➡

 

Lower buttonhole lever when sewing buttonholes.

➡

 

Raise buttonhole lever when sewing stitch patterns.

Foot control plug is pulled out, while operating foot control.

➡

 

Push in foot control plug.

Machine is locked up due to thread entangled with bobbin case or rotation 

interrupted forcibly.

➡

  

Turn off power switch and eliminate the problem that caused the

     machine to stop.

Reverse/tacking stitch button is pushed, while buttonhole stitch is selected.

➡

 

Tacking stitch is made automatically after buttonhole stitch is completed. 

      It is not necessary to push the reverse/tacking stitch button.

Bobbin winder is in operation.

➡

 

Move bobbin winder to left when it is not used.

If an incorrect operation is made, a helpful message will be displayed. When a helpful 

message is displayed, fix the problem following the instructions below.

HELPFUL MESSAGES

Summary of Contents for 6199





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands