Singer 311270, Operation And Safety Notes

Page: 21 / 75

21 GB/IE/NI
3. The iron should always be turned to ‘Off’ before plugging or
unplugging from outlet.
Never yank cord to disconnect from outlet; instead, grasp
plug and pull to disconnect.
4. Do not allow cord to touch hot surfaces. Let iron cool com-
pletely before putting away.
Loop cord loosely around iron when storing.
5. Always disconnect iron from electrical outlet when filling with
water or emptying and when not in use.
6. Do not operate iron with a damaged cord or if the iron has
been dropped or damaged.
To avoid the risk of electric shock, do not disassemble the iron
take it to a qualified serviceman for examination and repair.
Incorrect reassembly can cause a risk of electric shock when
the iron is used.
7. Close supervision is necessary for any appliance being used
by or near children. Do not leave iron unattended while
connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water, or
steam. Use caution when you turn a steam iron upside down
– there may be hot water in the reservoir.
9. If the malfunction indicator goes on, the flatiron is not operat-
ing normally. Disconnect from the power supply and have the
flatiron serviced by qualified service personnel.
Special instructions
1. To avoid a circuit overload, do not operate another high
wattage appliance on the same circuit.
2. If an extension cord is absolutely necessary, a 10-ampere
cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that it
cannot be pulled or tripped over.
Save these instructions
More specifically:
DO NOT
let children or untrained persons use the appliance
without supervision.
NEVER immerse the iron, cable or plug in any liquid.
DO NOT
leave the hot iron touching fabrics or very inflammable
surfaces.
311270_Singer_Buegeleisen_SNG4.23_content_DE_GB_IE_NI_FR_HU_CZ_SK.indd 21 31.10.18 14:36