Chapter 2. Installing and Set Up
2-2
３．
Pull down the Outer Box (Bottom) like left side picture
.
４．
Insert removed Slope Cardboard between Outer Box (Bottom) to
Caster of Printer Unit bottom.
５．
Pull and slide the printer on the slope slowly to unload it with
holding handles on both side of printer unit.
6. Take out the accessories from the box. Check that the following items,
as illustrated below, are present.
Dust box
Tray
Paper flange (Black)
Paper flange (blue)
Operation Manua
Power cable
Caution: Make sure to install slope cardboard until contact of
Stopper.
Slope
Cardboard
Stopper
Cushion
（
Lower Front
）
Cushion
(Lower Center
）
Slope Cardboard
Stopper
Caster
Caster
Outer Box
(Bottom)
Handl
e
Handle
Caution: Please handle it carefully, because the weight of
this printer is around 70Kg. And please make sure
to use handles.
