30
8.3.3 Select Control Mode
Main menu structure can be different in different “Ctrl Mode”.
Configuring the control mode
1.
Select “User”, Log into the control interface on touch screen with password.
2.
Select “Ctrl Mode” > “Manual Operate”
Then the “Settings” is visible.
8.3.4 General Settings
Fig. 8-5 Setting Interface Sample
There are General Setting and Advanced Setting, the commonly used setting is in the “General”
Users should set the “DC Configuration” according to the voltage and current requirement of BMS.
The detailed advanced setting can be seen in Appendix1 12.4 Parameter Setting.
8.3.5 Communication setting
Procedure:
If you do not see the settings options, do the following first:
1.
Select “User”> Input password> “OK”>“Login”.
2.Select “Ctrl mode”> “Manual Operate”.
3.Select “Setting”> “Advanced”, IP addresses, gateways, subnet masks, Porter rates,
