Before using the Machine
Important
- Once you turn the power off, wait 5 seconds or longer to turn the power on again.
-
If you are not using the device for a long time or if you are moving the device, turn the power off
and unplug the power cord from the outlet.
5. Consumables Handling
Warning
- Do not burn the Cartridge unit or filament. It may be a cause of big fire or burn by ignition.
Caution
- Keep them out of the reach of children.
- If skin irritation occurs after touching the filament, please see a doctor.
Important
-
Do not keep the cartridge unit in the following places.
•
Exposed to fire
•
Exposed to direct sunlight;
•
Where temperature or humidity may rise;
•
Where sharp change of temperature may occur;
•
Covered with dust;
•
Inside a vehicle for extended time.
- Keep cartridges away from physical impact or vibration.
- Do not unpack cartridges until you are just ready to use them.
5.1
PLA
It is a material that can be easily printed by the users using the 3D printer for the first time. You can easily print va-
rious colors and complex shapes. Ambient temperatures above 50 ° C can cause material properties to change,
causing the material to expand or scatter. PVA can be used as a support material.
Nozzle temperature:
200 ° C
Bed temperature:
60 ° C
Printing Speed:
40mm / s
Color:
White, Black, Gray, Red, Yellow, Green, Blue, Pink, Purple
Storage:
Store in cartridges with the silica gel that was included in the purchase.
5.2
ABS
Widely used in 3D printers, it has more rigidity and heat resistance than PLA. Due to the high temperature of the
nozzle and the air when printing, printing are not available with other materials. ABS material can be deformed by
shrinkage when the temperature in the cabin drops during printing. Particularly when printing a wide output surface to
the bed, shrinkage may occur at the corners.
Nozzle temperature:
230 ° C
Bed temperature:
90 ° C
Output speed:
40mm / s
Color:
white, black, gray, red, yellow, green, blue
Storage:
Store in cartridges with the silica gel that was included in the purchase.
7
Summary of Contents for 5X Series
Page 20: ...Before using the Machine 13...
Page 26: ...5X 7x Series USER MANUAL...
