11
Slicer Program Manual
Detail description
File
Loads 3D model (equivalent to Load button)
Load G-code and the model to show the print path
Save the loaded model to another type of file or name
Save G-code after slicing the loaded model
MODE
3DWOX offers users two types of different modes for slicing.
“EASY MODE”
offers an predefined setting for a fast and easy print,
“ADVANCED MODE”
allows
users to set each and every detailed value for user preference, to achieve desired printouts.
Select Settings
Various parameters for slicing can be configured. (apparatus, G-code and profile)
<Printer Setting>
- Printer Model : A connected default printer appears on the screen.
- E-steps / 1mm filament: Number of the motor’s rotation steps when 1mm filament is discharged.
Setting this value to 0, the printer firmware will ignore this function and will operate with the default
value.
- Bed Heating Function: Only select when bed heating function is available. When left unchecked, G-code
for bed heating will not be created.
- Slicing Origin Point Correction (based on the equipment’s origin point): Place the 3D model on the bed
based on the equipment’s origin point (0,0).
Summary of Contents for 3Dwox DP102
Page 27: ...27 Slicer Program Manual Memo ...
Page 28: ......
