sumables not in place, excessive pilot arc use.
• Air flow manual activation switch to set & test air
pressure, pressure without the need to trigger the
torch.
• 4.3 inch color LCD screen, easier to operate, real
time display of welding content.
5.3. ENVIRONMENTAL CONDITIONS
The machine does not require particular environ-
mental conditions. The machine must be installed in-
doors in a well-lit, ventilated industrial building with
solid and level flooring.
The machine is suitable for operating in environ-
ments that:
• have an altitude not exceeding 2000 m a.s.l.;
• temperature b 5 ° and + 35 ° C;
• relative humidity not higher than 80%.
It is forbidden to use the machine in environments
that are:
• dusty;
• in corrosive atmosphere;
• at fire risk;
• in an explosive atmosphere.
ATTENTION: The welding machine has an IP 23
protection grade, therefore its use is precluded
in certain environmental situations, such as rain,
excessive presence of metallic dust, presence of
acids and corrosive atmospheres.
5.4. LIGHTING
The lighting of the area of installation must comply
with the laws in force in the country where the ma-
chine is installed and must, however, ensure good
visibility at all points, not create hazardous reflec-
tions and allow clear reading of the control panels as
well as identification of emergency buttons.
As the machine does not have its own light, it is nec-
essary for the working environment to be equipped
with general lighting to guarantee the machine has a
value of 200 and 300 lux at all points of the machine.
5.5. VIBRATIONS
Under operating conditions that comply with the in-
dications for proper use, the vibrations are not such
as to cause hazardous situations. If this happens, you
must request technical assistance and suspend the
use of the equipment until the fault is resolved.
5. MACHINE DESCRIPTION
5.1. OPERATING PRINCIPLE
NOVACUT series systems are designed for plasma
cutting.
The NOVACUT series system composition is shown
below.
5.2. FEATURES AND MAIN
COMPONENTS
• IGBT module inverter technology for smooth, sta-
ble output, increased reliability .
• Microprocessor control system for superior & dy-
namic arc characteristics.
• CNC interface connection.
• Euro connect torch system with safe & robust con-
nection to machine.
• Advanced strata plasma torch with european
torch head for superior cutting performance and
consumable life.
• Non HF arc starting system for increased reliability
and low EMF pollution.
• Automatic pilot arc control system for increased
cutting capability and speed, especially for dis-
continuous cutting.
• Strong environmental protection againt moisture,
salt spray and corrosion .
• Intelligent protection system protects plasma
torchfrom damage/incorrect /air pressure, con-
1.995.232 EN - Rev. 1.1
NOVACUT 106 LCD
19