2. Notice
1.Ensure the specification of power for weekly timer, or the
weekly timer may work abnormally, or even damage the weekly
timer.
2. Ensure the correct joint of communication wire, or there will be
communication error.
3. Don’t place the weekly timer to where there is water leakage or
direct sunshine.
4. Prevent knocking, throwing, or breaking down then assembly the
weekly timer too frequently.
5. The time for the first electrify of weekly timer is about 10s.
6. Under the circumstance of malfunction (such as burning odor is
smelled), turn off the power of weekly timer immediately.
3. Joint
3.1
Power Joint
As shown CN2 in fig.3, power can adopt the power switch
offered by our company, but can also adopt other power but with
the same joint, and input power specification should be 12V,
3
to
rminal A at manual control, terminal B should correspond to
terminal B.
400mA.
.2
Communication Joint
As shown CN1 in fig.3, A and B are for connecting manual
control. When connecting with communication wire,
communication terminal A at weekly timer should correspond
te
4