1. Installation Method
1. First, select an installation location, leave a slot according to
dimension of power switch. The slot is for assembly power switch.
2. Connect the power cords of weekly timer and power switch by
following the figure shown below, and make the power cord of
power switch and twisted-wire with crystal joint through electric box
3
> and base plate of weekly timer onto
e box cover of weekly timer.
nward, or the panel of
manual contro
.
<3>.
. Fix power box of switch <2
power box <3> with bolts.
4. Cover th
Notice:
Pay special notice to the direction of base plate of weekly timer when
installing it. The side with 2 gaps should be dow
l cannot be installed correctly
Fig.1 Concealed wire
2