21
4.Put wiring cover back and then tighten the screw.
5.Close the panel.
Installation of indoor unit
Note:
●
All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.
● For the air conditioner without plug, an
air switch must be installed in the line.
The air switch should be all-pole parting and the contact parting distance should
be more than 3mm.
3. Remove the wire clip; connect the power
connection wire to the wiring terminal
according to the color; tighten the screw
with wire clip.
Note: the wiring board is for reference only,
please refer to the actual one.
power connection
wire
cable-cross
hole
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
yellow-
green
brown
07
、
09
、
12
、
18K Heat Pump Type:
outdoor unit connection
wiring board grounding
wire
2
N
(1)
3
wire clip
Summary of Contents for SYMPHONY MS-H09AISW PT
Page 1: ...USER S MANUAL MS H09AISW MS H12AISW MULTI SYSTEM SYMPHONY...
Page 2: ...Original instructions...
Page 29: ......
