background image

11

3.11  Energy Saving Function Setting

2

Energy Saving Setting for Heating

Fig. 13 Energy Saving Function Setting

function option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the lower limit, after that, 
press the SWING/ENTER button to activate this function.

Turn on energy saving function:

1

Energy Saving Setting for Cooling

When the unit runs under the COOL or DRY mode, press FUNCTION button to select "SAVE"

function option. When 

 icon flashes, if you press SWING/ENTER button without pressing ▲ or 

Cancel energy saving function:

If energy saving function has been set, press FUNCTION button on the panel to select “SAVE” 

▼ button, energy saving function will be canceled;  if you press SWING/ENTER button after pressing
▲ or ▼ button, energy saving function will be activated.

When the unit runs under the HEAT mode, press FUNCTION button to select "SAVE" function

option, with "SAVE" flashing, and  then  press ▲  or  ▼  to  adjust  the  upper  limit,  after  that,  press 
SWING/ENTER  button  to activate this function.

Note: 
under energy saving setting mode, press “MODE” button to switch the energy saving setting for 
COOL or HEAT mode.

Wi

Fi

Wi

Fi

Press “MODE” button to switch to the 

Press “FUNCTION” button to select the

“SAVE” function option

Turn on the unit with the “SAVE”

function deactivated

“SAVE” setting for heating

Press “SWING/ENTER” button to

activate the “SAVE” function

Press ▲ or ▼ to adjust the lower limit

Press ▲ or ▼ to adjust the upper limit

Wi

Fi

Wi

Fi

Wi

Fi

Wi

Fi

Wired Controller 

SWC-04

Summary of Contents for SWC-04





































Reviews: