owner’s manual
7
CAUTION
Fig.5-2
The control box cables, which are originally connected with the
main body electrical terminators must be pulled off before doing
as indicated above.
Fig.5-1
Air Outlet
Selection Switch
●
For Console Type
Push the grill switches to the arrow directions, then open the
air-in grill downwards.Press the claws on the right and left of the
air filter down slightly,then pull upward.
Fig.5-6
Fig.5-7
especial function filter
Hold the tabs of the frame,and remove the claws in 4 places.
(The especial function filter can be renewed by washing it with
water once every 6 months.We recommend replacing it once
every 3 years.)
Fig.5-8
When the power switch is connected, some energy will be
consumed, even if the unit is not in operation. So please
disconnect the power to save the energy.
A degree of filth will be accumulated due to certain performance
after several seasons of operation. So special maintenance is
advised.
Take out of the batteries from the remove controller.
NOTE
Maintenance after a long stop period
(eg. at the beginning of the season)
Check and remove everything that might be blocking inlet
and outlet vents of indoor units and outdoor units.
Clean air filters and casings of indoor units.
Refer to "Cleaning the air filter" for details on how to
proceed and make sure to install cleaned air filters back in
the same position.
Turn on the power at least 12 hours before operating the
unit in order to ensure smoother operation. As soon as he
power is turned on, the remote controller displays appear.
