Sinclair ASH-28AT, User Manual

Page: 20 / 32

1 6
Emergency run operation procedure
If Wireless remote controller lost,open the surface panel and operate as following:
d. When turning it to Stop position, the unit will stop running.
c. When turning it to Run position, the main unit will run at the
received remote control order.
b. When turning it to Test position, the main unit will enter into
Cool mode, indoor fan will run at high fan speed, if there is remote
control signal, main unit will run at the remote control signal, at
this time to shield the low pressure switch.
a. When turning it to Auto position, unit will run in Auto mode,
if there is remote control signal, it will run at the remote control
signal.
Manual switch (Auto, Test, Run, Stop)
Air flow direction adjustment procedure
1.Adjusting up/down air flow direction
With wireless remote controller,adjust air flow direction
by rotating the UP/DOWN deflectors up and down
automatically or stopping at an angle.
* Press SWING button,the deflectors start to rotate and
stop when repress.
2.Adjusting left/right air flow direction
As shown,move the LEFT/RIGHT deflectors by hand,
adjust air flow left or right or three different directions
to every corner of room so as to make everywhere temp.
average.
deflectors Adjusting left/right air flow direction